Skip to main content

Posts

How to configure engine power 55%, 65%, 75% on Piper Archer / Piper Cherokee

Most pilots, even CFIs, don't understand how to properly configure engine for various altitudes on a simple Piper Archer. The advice of "full rich below 3000" is simply wrong. Below is a simplified procedure based on the POH. It will ensure better performance, longer range, and longer engine life. The advice of "lean until running rough, then add some" is better, but still imprecise.  First, see POH section 4.27 CRUISING on how to configure engine. Simplified procedures Climb Mixture, throttle full forward Note the EGT temperature just after takeoff As you climb EGT will drop (too rich). Every 500 or 1000', lean mixture slightly to raise EGT back to the temperature you noted on takeoff.  DO NOT allow temperature to get higher than this! At 6000' lean much more to get peak EGT. Note the temperature. Every 600 or 1000' above 6000' are-lean mixture to get back to peak EGT. Best Power Cruise (fly fast): Mixture, th...

The worst and best states to form a C or S corporations

If you're forming a C- or S- corporation and not planning to turn a profit any time soon and don't particularly care what state it's formed in, these question comes up: What is the cheapest state to incorporate in? What are the lowest annual filing fees? What is the fastest turnaround time to form the corporation? I could not find answers to these questions anywhere so I created my own data set. The following lists are showing fixed fees paid to the state over the first 5 years. Why don't I just incorporate in Delaware or California like everyone else? You're asking the wrong question. You should be asking" Why should I? " The cost difference for year 1 does not seem like much. But your corporation is going to be around for many years. After just 5 years, your CA corp will have cost you $4255, this is money you will never seen again, paid as fees to the state. Compare that with Oklahoma, where 5 year cost is just $52. Imagine if your structu...